A 25 in by 16 in by 28.5 in printer stand with a charging station built into the frame, so the printer, a phone, and a laptop all draw power at the stand rather than through a tangle of cords crossing the floor. The strip carries two AC outlets rated 125V and 12A, one USB port at 5V and 2.4A, and one Type-C port at 5V and 3A, fed by a 4.9 ft cord. The wide tabletop is rated for 110 lbs, enough for a full-size laser printer with room left over to stage documents, and raised guardrails around the edge stop supplies from being nudged over the side while paper is loaded. Below it, open mesh shelves with 9.5 in of clearance between levels keep office supplies visible and sorted, and each shelf carries 33 lbs of its own. A 10.5 in by 16 in pull-out slide runs on the lower frame and takes the load a floor unit would otherwise occupy: a paper shredder that needs to come forward to empty, or a CPU tower that needs airflow and cable access from the back. A powder-coated metal frame resists cracking and deforming under that repeated in-and-out motion, adjustable foot pads take the wobble out of an uneven floor, and four universal wheels move the 21.5 lb stand anywhere in the workspace before it settles. Assembly is needed and an instruction sheet is included in the box.