Refrigerant lines, control wiring and the drain hose normally run down an exterior wall in plain sight once a ductless system is in place. This 16.5-foot PVC line set cover kit closes them into a clean 4-inch-wide channel, so the run reads as a finished detail rather than exposed tubing. What arrives is not one long piece but a full set of shapes: straight duct sections at 39.5 by 2.7 by 4 inches, a flexible duct at 28.3 by 3.6 by 2.5 inches for the bend leaving the outdoor unit, inside and outside corners at 4.6 by 4.6 by 4.1 inches, a 90 degree elbow at 5.4 by 5.4 by 4.3 inches, a 45 degree elbow at 4.1 by 4.1 by 3 inches, a tee at 6.5 by 5.4 inches, a wall cover at 8.5 by 5.3 by 3.3 inches, an inlet at 5.6 by 5.1 inches, and a connector at 4.3 by 2 by 2.9 inches. Straight sections cut freely, so an odd wall length is handled without leaving a gap at the end of the run. Weather-resistant PVC is what lets the channel sit outdoors season after season, shielding pipes, wires and cables from the elements while holding them bundled and straight instead of sagging along the siding. The white finish takes paint, so the channel can be matched to the building exterior rather than drawing the eye. Sizing suits mini-split and central air conditioners rated from 7000 BTU to 24000 BTU. The required hardware and an installation guide travel in the same single carton.
Features: Weather Resistant, Outdoor
Weight (lb.): 7.5 Lb
Base Material: 100% Pvc
Care: Wipe Clean
Country of Origin: Imported
Refrigerant lines, control wiring and the drain hose normally run down an exterior wall in plain sight once a ductless system is in place. This 16.5-foot PVC line set cover kit closes them into a clean 4-inch-wide channel, so the run reads as a finished detail rather than exposed tubing. What arrives is not one long piece but a full set of shapes: straight duct sections at 39.5 by 2.7 by 4 inches, a flexible duct at 28.3 by 3.6 by 2.5 inches for the bend leaving the outdoor unit, inside and outside corners at 4.6 by 4.6 by 4.1 inches, a 90 degree elbow at 5.4 by 5.4 by 4.3 inches, a 45 degree elbow at 4.1 by 4.1 by 3 inches, a tee at 6.5 by 5.4 inches, a wall cover at 8.5 by 5.3 by 3.3 inches, an inlet at 5.6 by 5.1 inches, and a connector at 4.3 by 2 by 2.9 inches. Straight sections cut freely, so an odd wall length is handled without leaving a gap at the end of the run. Weather-resistant PVC is what lets the channel sit outdoors season after season, shielding pipes, wires and cables from the elements while holding them bundled and straight instead of sagging along the siding. The white finish takes paint, so the channel can be matched to the building exterior rather than drawing the eye. Sizing suits mini-split and central air conditioners rated from 7000 BTU to 24000 BTU. The required hardware and an installation guide travel in the same single carton.
