Larger inflatables are where an underpowered blower shows its limits, sagging at the far corners no matter how long it runs. This unit answers that with a 980W motor rated at 1.31 HP, moving 1550 CFM at 2000 pa of wind pressure so a big bounce house or a long water slide comes up firm and stays that way. Setup stays simple: seat the 4.5-in outlet into the inflation sleeve, drive the ground stakes so the running unit stays put, and flip the switch. Power draw is a standard 120V at 60 Hz, and the 12-ft cord covers the distance to most outdoor outlets without an extension. Because a blower typically runs unattended for hours, over-load and over-heat protection is built in and shuts the motor down before a blocked intake or a stalled fan becomes a repair. The shell is molded from rugged PP chosen for impact resistance, backed by galvanized metal for a long service life in sun and damp, and a grille with a safety switch guards the air outlet while the fan is spinning. The 17-in by 10-in by 16-in body carries by its integrated handle at 15.9 lb, light enough to reposition mid-setup. The same unit handles inflatable projector screens and other holiday inflatables when the season changes, so it earns storage space year round rather than one weekend a summer.
Use: Outdoor
Base Material: 70% Pp, 30% Galvanized Metal
Care: Wipe Clean
Country of Origin: Imported
Larger inflatables are where an underpowered blower shows its limits, sagging at the far corners no matter how long it runs. This unit answers that with a 980W motor rated at 1.31 HP, moving 1550 CFM at 2000 pa of wind pressure so a big bounce house or a long water slide comes up firm and stays that way. Setup stays simple: seat the 4.5-in outlet into the inflation sleeve, drive the ground stakes so the running unit stays put, and flip the switch. Power draw is a standard 120V at 60 Hz, and the 12-ft cord covers the distance to most outdoor outlets without an extension. Because a blower typically runs unattended for hours, over-load and over-heat protection is built in and shuts the motor down before a blocked intake or a stalled fan becomes a repair. The shell is molded from rugged PP chosen for impact resistance, backed by galvanized metal for a long service life in sun and damp, and a grille with a safety switch guards the air outlet while the fan is spinning. The 17-in by 10-in by 16-in body carries by its integrated handle at 15.9 lb, light enough to reposition mid-setup. The same unit handles inflatable projector screens and other holiday inflatables when the season changes, so it earns storage space year round rather than one weekend a summer.
