This over the door ironing board hangs on a door instead of claiming floor space, which makes it a practical answer in an apartment or a small laundry room where a full-size standing board simply will not fit. The bracket suits doors up to 2 inches thick, so it works on standard interior doors without hardware changes, and the board lifts off the door as easily as it goes on. Folded, it collapses to roughly 2 inches deep against a 50-inch height, flattening to almost nothing when it is out of the way. A fixing device holds the folding action securely, so the board locks open for use and stays put rather than dropping while a garment is being worked. The ironing surface measures 42 by 14.5 inches, wide enough to lay a shirt or a pair of trousers flat rather than feeding fabric through in short sections, and the frame is rated to hold 22 pounds. Three layers make up the cover, and each has a job. The outer layer is cotton fabric, chosen so the iron glides rather than drags. The middle layer provides heat resistance across the working surface. The bottom layer is metal mesh, which gives the cover its endurance and lets steam pass instead of pooling underneath. A built-in iron holder is fitted to the frame so a hot iron has somewhere to sit within easy reach between passes, though the iron itself is not included. The supporting structure is robust metal for firmness and stability under pressure, and the finished board weighs 8 pounds, light enough to move between doors and carry with one hand.