Going tubeless removes the part that usually fails first. Air is held by the bead against the rim, and each 15 by 6.00-6 tire runs to 30 PSI while carrying 440 pounds of dynamic load on a 4 ply natural rubber carcass. The hub is preset at 3 inches centered with a 3/4 inch bushing, matching mower shafts between 0.7 and 0.75 inches, and e-clips plus four flat washers are supplied for the swap. A 6 inch rim and 15 inch overall diameter keep deck height where the manufacturer set it. Sintered bearings turn smoothly under side load during tight turns, and the tread gives firm grip on gravel or packed dirt without tearing grass. The pair weighs 17.5 pounds. Not intended for highway use.
# Pieces In Set: 2
Features: Corrosion Resistant
Shape: Round
Assembly: Assembly Required
Base Material: 60% Rubber, 40% Metal
Finish: Painted
Care: Wipe Clean
Material: Rubber
Country of Origin: Imported
Going tubeless removes the part that usually fails first. Air is held by the bead against the rim, and each 15 by 6.00-6 tire runs to 30 PSI while carrying 440 pounds of dynamic load on a 4 ply natural rubber carcass. The hub is preset at 3 inches centered with a 3/4 inch bushing, matching mower shafts between 0.7 and 0.75 inches, and e-clips plus four flat washers are supplied for the swap. A 6 inch rim and 15 inch overall diameter keep deck height where the manufacturer set it. Sintered bearings turn smoothly under side load during tight turns, and the tread gives firm grip on gravel or packed dirt without tearing grass. The pair weighs 17.5 pounds. Not intended for highway use.
