The Behringer Powerplay 16 P16-d 16-Channel Digital Ultranet Distributor extends and expands the Powerplay P16 personal monitor system by duplicating a single low-latency (< 0.9 ms), 16-channel, 24- bit Ultranet signal into 8 identical digital outputs. These 8 cloned digital signals can then each be sent to a P16-m personal mixer or other Ultranet device. Each P16-d Ultranet Distributor receives the Ultranet signal through a single CAT5e Rj-45 input jack. The P16-d then clones the Ultranet signal and sends 8 copies back out through the unit's 8 Ultranet Rj-45 output jacks. In addition to the Ultranet 16-channel digital signal, each P16-d also sends out a power signal through each Ultranet output. When power outlets are scarce, each of these bus-power signals can be used to power a P16-m mixer. Each of these P16-m mixers then allows each user to create their own personal, customized headphone or monitor mix. Within a large Ultranet network originating from a P16-i Input Module, the P16-i Input Module can send out 6 identical Ultranet signals, each with 16 channels of 24-bit audio, to 6 P16-d hubs. Each P16-d hub in turn distributes 8 copies of the same 16-channel digital signal to 8 P16-m Digital Mixers, for a total of 48 P16-m mixers. The P16-d also seamlessly integrates with the x32 digital mixer. The x32's single Ultranet output signal can be sent to a single P16-d hub for further distribution to P16-m mixers or additional P16-d distribution hubs. As part of an Ultranet network, the P16-d supports a complete personal monitoring solution for live, studio or installed sound applications..